Support: LI-600 Porometer/Fluorometer

What are you looking for?

General Help

Calibration Certificates

Submit Search

Videos

The following video tutorials show how to use the LI-600 Porometer/Fluorometer.

Introduction

Unpacking the LI-600

This video shows what's in the box with the LI-600.

Overview of the configuration software

This video provides an overview of the LI-600 software.

Measurements

Configuration details

This video provides a detailed tour of the configuration options for both the LI-600 and LI-600N.

High through-put measurements

The LI-600 is designed to make fast survey measurements. This video shows a typical setup for high through-put measurements.

Maintenance

Maintaining the LI-600

This video presents basic maintenance procedures for the LI-600.

Servicing the pump

This video shows how to expose the internal pump for servicing.

Cleaning the Lower Chamber Aperture

This video shows how to clean parts of the lower chamber aperture.

User-calibration

Zeroing with the zero kit and internal pump

This video shows how to set the zero using the zero kit and internal pump.

Zeroing with tank gas or an external pump and desiccant

This video shows how set the zero using a tank of zero gas or an external pump with desiccant.

Setting the span

This video shows how to set the span calibration.

Upgrades

Installing the 600-01 fluorometer upgrade kit on the LI-600 Porometer/Fluorometer

This video shows how to install the fluorometer on instruments that were originally provided without a fluorometer.

Webinars

LI-600 Webinar Series - Session 1: Introducing the LI-600 Porometer/Fluorometer

In session 1, learn about the instrument’s features—including measurement techniques and key specifications.

LI-600 Webinar Series - Session 2: LI-600 Theory

In session 2, learn about the instrument theory—from its steady state design to stomatal conductance and chlorophyll a fluorescence measurement parameters and benefits.

Phone

Email

Contact Forms

Request a Meeting

Address

International